About Usmore

About us
    Shenzhen Kingsheng PCBA Tech Co.,LTD (H.K. C-Alley Co.,LTD) was founded in the year 2002, mainly business are automotive cables, PCBA and electornic products trade, all the products were exported to foreign markets, mainly to Eastern Europe market. Since year 2005, Kingsheng begin to focus on PCB Assembly and created our own factory in Baoan district, Shenzhen. more

Sketch for background,design,component and manufacturing process for PCBA
Sketch for background,design,component and manufacturing process for PCBA
Demystifying the background,circuit board, design,component and manufacturing process of PCBA  
Background of Kingsheng PCBA
A printed circuit board, or PCB, is a self-contained module of interconnected electronic components found in devices ranging from common beepers, or pagers, and radios to sophisticated radar and computer systems. The circuits are formed by a thin layer of conducting material deposited, or "printed," on the surface of an insulating board known as the substrate.
Individual electronic components are placed on the surface of the substrate and soldered to the interconnecting circuits.Contact fingers along one or more edges of the substrate act as connectors to other PCBs or to external electrical devices such as on-off switches. A printed circuit board may have circuits that perform a single function, such as a signalamplifier, or multiple functions.
There are three major types of printed circuit board construction: single-sided, double-sided, and multi-layered. Single-sided boards have the components on one side of the substrate. When the number of components becomes too much for a single-sided board, a double-sided board may be used. Electrical connections between the circuits on each side are made by drilling holes through the substrate in appropriate locations and plating the inside of the holes with a conducting material. The third type, a multi-layered board, has a substrate made up of layers of printed circuits separated by layer of insulation. The components on the surface connect through plated holes drilled down to the appropriate circuit layer.
This greatly simplifies the circuit pattern of Kingsheng PCBA
Components on a printed circuit board are electrically connected to the circuits by two different methods: the older "through hole technology" and the newer "surface mount technology." With through hole technology, each component has thin wires, or leads, which are pushed through small holes in the substrate and soldered to connection pads in the circuits on the opposite side. Gravity and friction between the leads and the sides of the holes keeps the components in place until they are soldered. With surface mount technology, stubby J-shaped or L-shaped legs on each component contact the printed circuits directly. A solder paste consisting of glue, flux, and solder are applied at the point of contact to hold the components in place until the solder is melted, or "reflowed," in an oven to make the final connection. Although surface mount technology requires greater care in the placement of the components, it eliminates the time-consuming drilling process and the space-consuming connection pads inherent with through hole technology. Both technologies are used today.
Two other types of circuit assemblies are related to the printed circuit board. An integrated circuit, sometimes called an IC or microchip, performs similar functions to a printed circuit board except the IC contains many more circuits and components that are electrochemically "grown" in place on the surface of a very small chip of silicon. A hybrid circuit, as the name implies, looks like a printed circuit board, but contains some components that are grown onto the surface of the substrate rather than being placed on the surface and soldered.